COMMERCIAL ROOFING & RESTORATIONPORT CHESTER, NY
Port Chester is not just another town on our service list — it is where L&M Roofing has been based since 1970. Our office, shop, and sheet-metal fabrication facility are at 140 Highland Street, and three generations of the family have run the company from the Village.
That matters practically. Crews stage from here every morning. Material and fabricated metal come out of our own shop. When a Port Chester building owner calls about an active leak, we are minutes away rather than an hour out on the Thruway.
The Village's building stock runs from nineteenth-century brick on Main Street through mid-century industrial along the waterfront to newer mixed-use and multi-family development. Older masonry buildings rarely have a roof problem in isolation — water gets in at the parapet, the coping, or the wall and shows up somewhere else entirely. Because we self-perform roofing, waterproofing, masonry, and metalwork with in-house crews, we can chase the actual source instead of handing it between trades.
WHAT WE DO IN PORT CHESTER
ROOFING SYSTEMS WE INSTALL
Port Chester's older masonry buildings and newer mixed-use construction call for different assemblies. For conventional low-slope roofs we install single-ply (TPO/EPDM), modified bitumen, and PMMA liquid-applied membranes, selected against the deck, the occupancy, and the budget. On amenity decks and terraces we install hot rubberized asphalt (American Hydrotech) beneath pavers, planters, and vegetative systems. As Siplast and American Hydrotech certified installers we can offer manufacturer-backed warranties, and because our own sheet-metal shop is here in the Village, copings, flashings, and edge metal are fabricated to the building rather than ordered to a catalogue dimension.
Fifty-Six Years in the Same Village
L&M Roofing has operated out of Port Chester since 1970 — three generations, one address, and more than a thousand completed projects across the tri-state area. We are an MBE-certified contractor in both New York City and New York State, and a NYCHA-approved contractor, and we have self-performed roofing and envelope work on public housing, schools, healthcare facilities, and municipal buildings throughout the region.
For local owners and managers that longevity is the practical point: we are still here to honor the warranty, and the crew that installed your roof works out of a shop you can drive to.
PORT CHESTER ROOFING FAQS
Where is L&M Roofing located in Port Chester?
Our headquarters, shop, and sheet-metal fabrication facility are at 140 Highland Street, Port Chester, NY 10573. We have operated from the Village since 1970. Call (914) 937-1030.
Do you work on smaller Port Chester commercial buildings?
Yes. Alongside large institutional work we handle Main Street storefronts, small industrial buildings, apartment buildings, and mixed-use properties throughout the Village. Being based here means a crew can be on site quickly.
How fast can you respond to a leak in Port Chester?
Faster here than anywhere else we work, because the shop and crews are in the Village. Call (914) 937-1030 for emergency service — we stabilize the situation first, then diagnose the underlying cause properly.
Do you handle older masonry buildings and façade work?
Yes. Much of Port Chester's building stock is older brick and masonry, where roof and wall problems are usually the same problem. We self-perform roofing, waterproofing, masonry, and metalwork, so the whole envelope is one contract and one point of accountability.
GET A FREE ROOF ASSESSMENT
140 Highland Street, Port Chester NY · MBE Certified · Self-Performed · Emergency Service Available